青州市表层土壤元素地球化学组合特征研究   总被引：1，自引：0，他引：1       下载免费PDF全文

姜冰  刘阳  颜丙鹏 《山东国土资源》2018,34(9)

聚类分析和因子分析可以获得土壤元素地球化学组合特征及其差异性。对青州市表层土壤样品数据进行分析研究,通过聚类分析,绘制表层土壤元素聚类谱系图,将23种元素或指标分为5个元素组合簇群及2个单元素簇,研究各元素间的组合特征,探讨其相关性、聚集性及其指示意义;通过因子分析,找出有代表性的因子,用其代表变量,绘制典型因子得分等值线图,并从中分析不同元素组合的区域分布基于何种因素,用11个代表性因子的分布特征就基本可以代表青州市表层土壤23项原始变量的分布特征,并对F1,F2,F3主因子进行了地质解释。聚类分析与因子分析相结合,利于表层土壤中元素的共生组合特征及其差异性研究,利于对研究区表层土壤异常进行归纳总结。  相似文献   

KK型管节点应力集中系数几何敏感性分析     

林海花  孙承猛  石强 《海洋工程》2020,38(6):142-150

KK型管节点是自升式平台桁架式桩腿中的一种管节点，其应力集中系数是影响桩腿疲劳寿命的重要参数。应力集中系数与管节点的几何形式密切相关，为分析KK型管节点应力集中系数对几何参数的敏感性，利用ANSYS软件对某KK型管节点进行几何参数化建模，利用有限元数值模拟方法对各工况下的热点应力进行分析，并分别计算各相应工况下的名义应力，然后将热点应力与名义应力相比得到不同几何参数下的热点应力集中系数。对计算结果进行整理分析，得到了KK型管节点应力集中系数对无量纲几何参数的敏感性规律。结果表明，应力集中系数与撑杆受力状态、管节点结构形式有关，在满足结构布置、建造工艺和其他安全性指标的前提下，分析结果能够为KK型管节点的结构设计和疲劳分析提供技术支撑。  相似文献   

山东大尹格庄金矿床深部三维定量成矿预测     

陈进  毛先成  邓浩 《地球学报》2020,41(2):179-191

大尹格庄金矿是胶西北招平断裂带中段的大型金矿床,但随着逐渐的开采其保有资源量不断下降,急需在矿床的深边部区域开展接续资源找矿工作。本文以大尹格庄金矿为研究对象,以区域成矿理论和找矿勘查模型为指导,利用三维地质建模技术构建了相关地质体的三维模型,在此基础上,采用定量化的方法提取地质体与成矿相关的控矿因素指标和矿化指标,并建立了三维定量成矿预测模型,并应用该模型圈定了3个找矿靶区。研究表明,该方法能够适用于大中型矿山的深边部找矿工作,其三维及定量化的预测结果能够为后续的勘探及开采工作提供重要参考。  相似文献   

Formulation of risk-targeted seismic action for the force-based seismic design of structures     

Jure Žižmond  Matjaž Dolšek 《地震工程与结构动力学》2019,48(12):1406-1428

A risk-targeted design spectral acceleration and the corresponding seismic design action for the force-based design of structures is introduced by means of two formulations. The first one called direct formulation utilizes the seismic hazard function at the site of the structure. Because the seismic action defined in the codes is often associated with a designated return period, an indirect formulation is also introduced. It incorporates a risk-targeted safety factor that can be used to define a risk-targeted reduction factor. It is shown that the proposed formulations give analogical results and provide an insight into the concept of the reduction of seismic forces for the force-based seismic design of structures if the objective is defined by a target collapse risk. The introduced closed-form solution for the risk-targeted reduction factor can be used to investigate how the target collapse risk, the seismic hazard parameters, the randomness of the seismic action, and the conventional parameters (ie, the overstrength factor and the deformation and energy dissipation capacity) affect the seismic design forces in the case of force-based design. However, collaborative research is needed in order to develop appropriate models of these parameters. In the second part of the paper, the proposed formulations are demonstrated by estimating the risk-targeted seismic design action for a six-storey reinforced concrete building. By verifying the collapse risk of the designed structure, it is demonstrated that the risk-targeted seismic action, in conjunction with a conventional force-based design, provided structure with acceptable performance when measured in terms of collapse risk.  相似文献   

Flow resistance and hydraulic geometry in bedrock rivers with multiple roughness length scales     

Robert I. Ferguson  Richard J. Hardy  Rebecca A. Hodge 《地球表面变化过程与地形》2019,44(12):2437-2449

Many models of incision by bedrock rivers predict water depth and shear stress from discharge; conversely, palaeoflood discharge is sometimes reconstructed from flow depth markers in rock gorges. In both cases, assumptions are made about flow resistance. The depth–discharge relation in a bedrock river must depend on at least two roughness length scales (exposed rock and sediment cover) and possibly a third (sidewalls). A conceptually attractive way to model the depth–discharge relation in such situations is to partition the total shear stress and friction factor, but it is not obvious how to quantify the friction factor for rough walls in a way that can be used in incision process models. We show that a single flow resistance calculation using a spatially averaged roughness length scale closely approximates the partitioning of stress between sediment and rock, and between bed and walls, in idealized scenarios. Both approaches give closer fits to the measured depth–discharge relations in two small bedrock reaches than can be achieved using a fixed value of Manning's n or the Chézy friction factor. Sidewalls that are substantially rougher or smoother than the bed have a significant effect on the partitioning of shear stress between bed and sidewalls. More research is needed on how best to estimate roughness length scales from observable or measurable channel characteristics. © 2019 John Wiley & Sons, Ltd.  相似文献   

Numerical modeling investigation on turbulent oscillatory flow over a plane rough bed composed by randomly arrayed particles   总被引：1，自引：0，他引：1  

ZHOU Zhibo  ZHANG Jinfeng  ZHANG Qinghe  LIU Run 《海洋学报(英文版)》2018,37(7):62-68

A three-dimensional numerical model is established to simulate the turbulent oscillatory boundary layer over a fixed and rough bed composed by randomly arrayed solid spheres based on the lattice Boltzmann method and the large eddy simulation model.The equivalent roughness height,the location of the theoretical bed and the time variation of the friction velocity are investigated using the log-fit method.The time series of turbulent intensity and Reynolds stress are also investigated.The equivalent roughness height of cases with Reynolds numbers of 1×10~4–6×10~4 is approximately 2.81 d(grain size).The time variation of the friction velocity in an oscillatory cycle exhibits sinusoidal-like behavior.The friction factor depends on the relative roughness in the rough turbulent regime,and the pattern of solid particles arrayed as the rough bed in the numerical simulations has no obvious effect on the friction factor.  相似文献   

基于可靠性的海洋立管疲劳安全系数研究     

吴剑国  万子诚  李智博  张萌  戴伟  孙政策 《海洋工程》2018,36(6):1-9

综合考虑了立管疲劳安全系数取值的相关因素——立管的安全等级、设计寿命、检验周期、载荷和损伤计算方法等的不确定性,提出了基于可靠度的疲劳安全系数确定方法,筛选了用于计算波致疲劳和VIV(涡激振动)疲劳的随机变量,给出了立管波致疲劳与VIV疲劳安全系数的计算流程,并以某SCR(钢悬链线立管)为例进行了安全系数计算。结果表明,该方法的计算结果优于传统的安全系数确定方法,尤其适合于特殊工程方案或新颖设计的立管疲劳校核。  相似文献   

Stability analysis of shotcrete supported crown of NATM tunnels with discontinuity layout optimization          下载免费PDF全文

Yiming Zhang  Xiaoying Zhuang  Roman Lackner 《国际地质力学数值与分析法杂志》2018,42(11):1199-1216

For tunnel constructed by New Austrian Tunnelling Method, the crown is the upper part of tunnel section, constructed during excavation process and supported by shotcrete. The stability of the crown has great influence on the safety of tunnel itself and the buildings above, which correlates, among others, with geometrical setup of tunnel and material properties of shotcrete and soil/rock. In this paper, aiming at analyzing the stability of shotcrete supported crown, a recently presented numerical method discontinuity layout optimization is adopted, which introduces a great amount of potential discontinuities cross over one another and provides a wide search space for efficient upper limit analysis. In the analysis, a well‐established hydration model of cementitious material is implemented for accounting the hydration of shotcrete. Then assumptions based on convergence‐confinement method are used for accounting the 3‐dimensional effect in 2‐dimensional analysis, finally providing time‐space–dependent assessments of stability of shotcrete supported crown.  相似文献   

浙江省人口健康脆弱性评估及影响因素分析   总被引：1，自引：0，他引：1  

童磊  郑珂  苏飞  汤青  曹轶蓉  郑艳艳 《地理科学》2020,40(8):1293-1299

运用集对分析法从敏感性和应对性2个方面对浙江省11个地市的人口健康脆弱性进行评估。研究表明：① 从敏感性和应对性2个维度对城市人口健康脆弱性进行评估的方法具有一定可靠性，但在突发大型流行性病毒感染疫情的情境下仍需进一步完善；② 各地市脆弱性指数排名与敏感性指数保持较高一致性，而与应对性指数则表现出异质性和随机性，认为降低敏感性是降低城市人口健康脆弱性指数的关键；③ 城市人口健康脆弱性评价还应该增加城市对大型突发公共卫生事件的敏感性和应对能力的考量，相应的评估方法和模型仍有待进一步研究。  相似文献   

区域创新政策评价的框架、测度与检验     

俞立平 《地理科学》2020,40(10):1610-1617

构建区域创新政策评价的理论框架，在宏观知识生产函数中引入信息化作为创新技术进步的替代变量，基于DEA与Malmquist指数，用全要素生产率指数存量来衡量区域创新政策。并以省际高技术产业为例进行了实证，研究结果表明：区域创新政策的特征和评价维度决定评价的多样性，基于政策效果与政策交互作用的区域创新政策评价具有重要意义；区域创新政策总体上处于稳步提高阶段，较低地区以西部中部地区为主；区域创新政策测度模型系统性较好，其检验方法有待进一步深化；采用政府研发经费投入作为区域创新政策的替代变量值得商榷。  相似文献